Description
The Anden 320 Dehumidifier uses an evaporator coil to drop air temperature before your grow room reaches dew point. Moisture is removed from incoming air and can be drained into a floor drain or outside the grow space. Before air is propelled back into the greenhouse, it is re-heated while passing over a condenser coil. Dehumidification will continue to be active to reach set point, then deactivate until sensor readings determine a need for operation.
320 Pints Per Day, 277VAC. Anden A320V3 is designed and built for cultivation. This industrial grow room dehumidifier unit removes up to 320 pints of moisture per day, and powerfully circulates air within your cultivation space to create a healthy, grow-optimized environment. And it really moves some air–up to 830 cubic feet per minute for maximum moisture removal. Setup is simple, and humidity is constantly controlled to help prevent crop disease and pests.
The Anden A320V3 Dehumidifier model was developed for precise humidity management to maintain a fixed saturation point. The A320V3 model can also be programmed to circulate air within your grow facility, cutting down on HVAC equipment costs. Dynamic airflow should carry moisture away from plants to prevent fungus, pests and other humidity diseases from establishing in your crops. Free circulating air will also maximize the availability of CO2 around the leaves of your plant. Units can be synced with the Anden 8840 Thermostat for full greenhouse HVAC readings and high tech remote functionality.
Innovative Remote Sensing
Cultivators consistently stress the importance of accuracy in humidity metrics, as unbalanced humidity can cause disease and have a significant impact on nutrient uptake. Commercial horticulture dehumidifiers are distinct from other industrial units by considering the thermodynamics of the greenhouse. Depending on where it is recorded, temperature and humidity can vary greatly. These models are designed to consolidate humidity readings through the use of sensors. Models are equipped with remote sensors that can be placed at plant level to provide accurate monitoring and control. Anden’s remote sensors allow growers to establish precise relative humidity to determine vapour-pressure deficit and optimize transpiration. It is critical to strike the correct deficit balance as an elevated VPD (over 1.25 kPa) will cause distorted growth, while low VPD (under 0.8 kPA) will limit mineral absorption. As drastic fluctuations in temperature and humidity will also affect plant development, Anden dehumidifiers incorporate a specialized extra sensor that will sample air continuously for three minutes every hour to ensure that desired humidity levels are maintained.
- 320 Pints/day – Industrial-level humidity control
- 830 CFM @ 0.0” – To remove moisture, it’s got to move the moisture-filled air. The powerful fans circulate huge amounts of air for maximum moisture removal
- Energy Efficient – Removes up to 2.6 liters per kilowatt hour, helping keep your operation efficient
- Easy Filters – The self-sealing air filter protects the unit’s vital components, plus it’s easy to replace
- Flexible Installation – The pre-installed electrical plug is simple to remove for hard-wired applications. Plus, options for suspended, freestanding, or ducted installation
- Safety Checks – Terminals on the dehumidifier make it easy to install a float switch to protect against overflows
- Remote Control – The included Model A77 remote control relays diagnostics from the dehumidifier, giving you simple control of the conditions in your cultivation space (upgrade options available)
- 1-2-3 for VPD – The unit constantly monitors humidity and temperature, making it simple to reach the optimal Vapor Pressure Deficit for maximum growth
- Built to Last – Designed and Manufactured in U.S.A. Dependability is at the heart of what we do. That’s why we offer a 5-year warranty on this product–so you can grow with confidence
Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks.
Features
- Control: On-Board digital with diagnostics
- Air supply orientation: Horizontal
- Filter: 20″ x 22″ x 2″ MERV 11
- Refrigerant: R410A
- Coil type: Copper tube, Aluminum fin with Electro-Fin E-coated
- Drain connection (requires drain trap): 3/4″ FNPT
- P-Trap required: Yes (included)
- Leveling feet: No
- Hanging brackets: Included
- Warranty: 5 years on all parts including refrigeration system directly from Anden. Store has no role in providing technical support or warranty fulfillment on Anden Dehumidifiers. The end user must contact Anden directly and provide a valid sales receipt or date of manufacture. Stores to deny returns of Anden Dehumidifiers.
- For Help Call: 1-800-972-3710
Included items
- Control: Model A77
- Drain fittings: 3/4″ MNPT x 3/4″ BARB – 3/4″ MNPT x 3/4″ Female pipe – 3/4″ FNPT x 3/4″ Female pipe – 3/4″ P-Trap
- Drain tubing (length, ID): 10′ – 3/4″ ID
- Thermostat wire: 30′ 20 gauge 4-wire
Specifications
- Capacity(1) PPD at 80°/60%RH: 315
- Energy factor(1): 2.6L/kW-h – 5.5 pints/kWh
- Voltage, phase, frequency: 277VAC, 1 phase, 60Hz
- Current draw (amps)(1): 9.2
- Power (Watts)(1): 2,450
- Power cord type and length: SJT, L7-20P, 10ft
- Hardwire: Field configurable
- Breaker size: 20 amp
- CFM: 830
- Operating range Temp/RH: 65/50 to 85/80
- Dimensions: 32 5/8″W x 24″H x 24 1/4″L
- Weight: 180 lbs
*********SPECIAL ORDER – PREPAID PLEASE!!***********
-
NO RETURN – NO EXCHANGE – NO REFUND
